Alarms
When in range of the Reader, your Sensor automatically communicates
with the Reader to give you Low and High Glucose Alarms if you turn
them ON. These alarms are turned OFF by default.
This section explains how to turn on and set alarms as well as how to use
them. Please read all the information in this section before setting and
using alarms.
CAUTION:
• For you to receive alarms, they must be turned ON and you
should ensure that your Reader is within 10 meters (33 ft) of
you at all times. The transmission range is 10 meters (33 ft)
unobstructed. If you are out of range, you may not receive
glucose alarms.
• To prevent missed alarms, make sure the Reader has sucient
charge and that sound and/or vibration are turned on.
30
To Next Page
Loading...
