Abbott FreeStyle Libre 3 Plus - Control Solution Testing

Control Solution Testing
You should do a control solution test when you are not sure of your
test strip results and want to check that your Reader and test strips are
working properly. You can do a control solution test with a blood glucose
or ketone test strip.
IMPORTANT:
• Control solution results should fall within the control
solution range printed on the test strip instructions for use.
• Do NOT use control solution past the expiration date. Discard
control solution 3 months after opening. Refer to control
solution instructions for use.
• The control solution range is a target range for control
solution only, not for your blood glucose or ketone results.
• The control solution test does not reect your blood glucose
or ketone levels.
• Use only MediSense glucose and ketone control solution.
• Check that the LOT number printed on the test strip foil
packet and instructions for use match.
• Replace the cap securely on the bottle immediately after use.
• Do NOT add water or other liquid to the control solution.
• Contact Customer Service for information on how to obtain
control solution.
63