Abbott FreeStyle Libre 3 Plus - Page 60

Step Action
2
Check the test strip expiration date.
3
Open the foil test strip packet at the notch and
tear down to remove the test strip. Use the test
strip immediately after removing from the foil
packet.
4
Insert the test strip with the three black lines at
the end facing up. Push the strip in until it stops.
5
Use your lancing device to obtain a blood drop
and apply blood to the white area at the end of
the test strip.
If sounds are turned on, the Reader beeps once
to let you know you have applied enough blood.
Note: See test strip instructions for use for
re-application instructions.
E.g. Expiration date:
March 31, 2030
D5
2030/03
13758
Abbott Diabetes Care Ltd. Range Road Witney, Oxon, OX29 0YL Made in UK.
Blood Glucose Sensor Electrode Abbott Diabetes Care Ltd. Range Road Witney, Oxon, OX29 0YL Made in UK.
4˚C
Apply Blood
55