Problem What It May Mean What To Do
You are not
receiving
glucose
alarms.
(cont.)
Sound/vibration are
turned off.
Check the Reader’s sound and
vibration settings to confirm
sound/vibration are on.
You may have set an
alarm level that is
higher or lower than
you intended.
Confirm your alarm settings are
appropriate.
You have already
dismissed this type of
alarm.
You will receive another alarm
when a new low or high glucose
episode starts.
Your Sensor has
ended.
Replace your Sensor with a new
one.
Your Reader battery
is dead.
Charge your Reader with the
included USB cable.
89
To Next Page
Loading...
