Abbott FreeStyle Libre User Manual

Getting to Know Your System
The FreeStyle Libre Flash Glucose Monitoring System has two main parts:
a handheld Reader and a disposable Sensor, which you wear on your
body. You use the Reader to wirelessly scan the Sensor and get your
glucose readings. The Reader also has a built-in blood glucose and ketone
meter, which works with FreeStyle Optium blood glucose and blood
ketone test strips.
Your System comes in a Reader Kit and a Sensor Kit. When opening your
kits, check that the contents are undamaged and that you have all parts
listed. If any parts are missing or damaged, contact Customer Service.
IMPORTANT: Safety information about the
System is in this User’s Manual. Read all of
the information in the User’s Manual and the
FreeStyle Optium blood glucose and ketone
test strip instructions for use before using your
System.
8

Abbott FreeStyle Libre Specifications

General

Sensor Wear Duration	14 days
Scan Time	1 second
Meter Category	Continuous Glucose Monitoring (CGM)
Name	FreeStyle Libre
Operating Temperature	10°C to 45°C
Water Resistance	IP27
Glucose Range	500 mg/dL
Measurement Range	500 mg/dL
Warm-up Time	1 hour
Compatibility	FreeStyle Libre Reader