Charging the Reader
A fully charged Reader battery should last up to 7 days. Your battery life
may vary depending on your usage. A Low Battery message accompanies
your result when you have enough charge remaining for about one day of
use.
Plug the included USB cable into an electrical
outlet using the included power adapter. Then,
plug the other end of the USB cable into the USB
port on the Reader.
Notes:
• You must charge the Reader when the battery
is low
to keep using the Reader.
• To fully charge the battery, charge the Reader
for at least 3 hours.
• Only use the USB cable and power adapter
included with the system.
• Fully charge your Reader before storing it for
more than 3 months.
To Next Page
Loading...
