Step Action
2
Check the test strip expiry date.
3
Open the foil test strip packet at the notch and
tear down to remove the test strip. Use the test
strip immediately after removing from the foil
packet.
4
Insert the test strip with the three black lines at
the end facing up. Push the strip in until it stops.
5
Use your lancing device to obtain a blood drop
and apply blood to the white area at the end of
the test strip.
If sounds are turned on, the Reader beeps once
to let you know you have applied enough blood.
Note: See test strip instructions for use for
re-application instructions.
E.g. Expiry date:
March 31, 2016
D5
2016/03
13758
To Next Page
Loading...
