Step
Action
5
Use your lancing device to obtain a blood drop
and apply blood to the white area at the end of
the test strip.
If sounds are turned on, the Reader beeps once
to let you know you have applied enough blood.
Note: See test strip instructions for use for
re-application instructions.
You will see a buttery on the screen while you
wait for your result. If sounds are turned on, the
Reader beeps once when your result is ready.
6
After reviewing your result, remove and discard the used test
strip according to local regulations.
Ketone Test
Apply Blood
IMPORTANT: After performing a blood ketone test,
wash your hands with soap and water and thoroughly
dry them.
49
To Next Page
Loading...
