8-5
Questions? Refer to Page 10-10 for Technical Support Instructions.
1. Press 1 for Test Setup.
2. P r e s s 2 for Test Type to continue to the
Test Type Glucose Units screen.
3. P r e s s 1-Next to continue to the
Test Type Glucose Action Range screen.
4. P r e s s 1-Next to continue to the
Test Type Glucose Critical Range
screen.
5. If Ketone testing is enabled, press 1-Next
to continue to the Test Type Ketone
Action Range screen, otherwise, press
1-Next to continue to the Test Setup
menu.
6. P r e s s 1-Next to continue to the
Test Type Ketone Critical Range screen.
7. Press 1-Next to continue to the
Test Setup menu.
Chapter 8: Review Setup
What You See on the Display What You Do Comments
Review Test Setup for Test Type
Note: This section illustrates some representative settings.
If the monitor does not display these screens, please refer to Chapter 10, Troubleshooting.
To Next Page
Loading...
Need help?
General
