8-7
Questions? Refer to Page 10-10 for Technical Support Instructions.
1. Press 1 for Test Setup.
2. Press 4 for Control Test to continue to
the Control Test Glucose Levels screen.
3. P r e s s 1-Next to continue to the
Control Test Glucose Result screen.
4. If Ketone testing is enabled, press 1-Next
to continue to the Control Test Ketone
Levels screen, otherwise, press 1-Next
to skip down to step 7.
5. P r e s s 1-Next to continue to the
Control Test Ketone Result screen.
6. P r e s s 1-Next to continue to the
Control Test Comment Code If
In-Range screen.
Chapter 8: Review Setup
What You See on the Display What You Do Comments
Review Test Setup for Control Test
Note: This section illustrates some representative settings.
If the monitor does not display these screens, please refer to Chapter 10, Troubleshooting.
To Next Page
Loading...
