Ablerex 3 MS series - Rear Panel Explanation

5
1.2.1.2. Rear Panel Explanation
1)
AC Inlet
This is to be connected with an AC power cord for plugging into
the wall receptacle.
This is to disconnect line input to protect application from Output
overload or short circuit.
Fuse Rating for120Vac
MS1K/MS1KR MS2K/MS2KR MS3K/MS3KR
20A/250V 25A/250V 50A/250V
Fuse Rating for 230Vac
MS1K/MS1KR MS2K/MS2KR MS3K/MS3KR
2) AC Input
Fuse
10A/250V 15A/250V 25A/250V
3) External
Battery
Terminal
This is a battery terminal to be connected with additional battery
banks for longer backup time purpose. Only a qualified technician
is permitted to proceed the installation.
This is to be plugged by the devices being protected by the UPS.
Socket Type MS1K/MS1KR MS2K/MS2KR MS3K/MS3KR
4) AC Outlet
(for230Vac)
IEC 3pcs 3pcs N/A
3
1
1
2
2
2
3
3
4
4
4
4
5
5
5
6
6
6
7
7
7
1
8
8
8
1KVA 2KVA 3KVA
RACK 1KVA
RACK 2KVA
RACK 3KVA