Ableton Push 3 User Manual

Recording Automation in Mix View.
You can hold one or more steps and record automation for them at the
same time. While holding a step and tweaking an encoder, the
corresponding parameter’s automation value will be adjusted
specifically for the time represented by that step. Note that per-step
automation can be created for any step, even if that step doesn’t
contain notes.
14 Track Control And Mixing
When working on a Set, you may want to focus on individual tracks to
take a closer look at how specific elements work with the rest of the
Set, then make adjustments accordingly.
You can stop, mute or solo selected tracks using the Stop Clip, Mute
and Solo buttons respectively.
7/29/23, 9:32 AM
Page 167 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)