If you have already activated the Auto
Login function, you can deactivate it here.
This menu item is only displayed if the
function has already been activated.
At the Wi-Fi settings, you can select the
desired network to which the camera
should be connected.
When the menu item is selected, all
networks in the environment are displayed.
Select your network and enter your own
Wi-Fi password.
The password entry window also shows
you the signal strength to the network,
make sure you have enough signal
strength to avoid transmission problems.
Enter the password and confirm with OK.
The settings are only accepted after
leaving the menu.
To avoid access by unauthorized persons,
protect your network by encrypting it with
WPA/ WPA2/ WPA2-PSK.
The settings are only accepted after
leaving the menu.
If the connection was not successful or
incorrect Wi-Fi information was entered,
press the reset button for 5 seconds to
reset the base station to factory settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
