Abus TVVR36000 - S.M.a.r.t; Checking the Hard Disk Drive Status

Maintenance
113
S.M.A.R.T
Click on the “S.M.A.R.T” submenu.
In this submenu, you have the option to check your hard
disk drive for errors.
HDD
Selection of the hard disk drive to
be processed.
Self-test status
Shows the status of the current self-
test
Self-test type
Select the type of the self-test.
Short Test / Expanded Test /
Transport Test
.M.A.R.T
Click on the icon to start the self-
test
Temperature (°C)
Display the HDD temperature
Switching on
(Days)
Display the operating days of the
hard disk drive
Self-evaluation
Status display of the self-evaluation
Complete evalua-
tion
Status display of the evaluation
Confirm the settings by clicking Apply and exit the menu
with OK.
Note:
If only one HDD is installed and this is set to
“Read-only”, then the device cannot make re-
cordings.
Checking the hard disk drive status
The status of each HDD can be checked in the “Mainte-
nance” menu. S.M.A.R.T. information (Self-Monitoring,
Analysis and Reporting Technology) is stored in the log
data.
 Open the log file and search according to the infor-
mation/S.M.A.R.T. Hard Disk Drive. Setting up the
hard disk drive alarms
 You can specify alarms to inform you of HDD errors.
To do this, call “Warning” in the “Settings” menu.