Access RAD ASMi-54 - Default QoS Settings; Configuration and Management Alternatives; Working with the Terminal

Installation and Operation Manual Chapter 3 Operation
ASMi-54 Ver. 1.0 Default Settings 3-5
Table 3-5. Default SHDSL Settings
Menu Parameter Default Value
PCS (Physical Coding Sublayer) 1
Administrative Status Up
Power Backoff Disable
SHDSL
Clock Source RX Clock: STU-R
PME (Physical Medium Entity) 1-4
Administrative Status Up
Line Probe Disable
Current Margin 0 dB [Disable]
Worst Margin 0 dB [Disable]
Loop Attenuation Threshold (dB)
[0-127]
0
PME
Configuration
SNR Margin Threshold(dB) [0-15] 0
Table 3-6. Default Bridge Settings
Menu Parameter Default Value
VLAN Mode Unaware
Forwarding Mode Filter
Bridge
Aging Time 300
Table 3-7. Default Bridge Port Settings
Menu Parameter Default Value
Bridge Port [1-6] 2
Ethernet Port [1-4] 1
Activation Enable
Port VID / Stacking VID [1-4094] 2
Accept Frame Type All
Copy Original Priority Disable
Default Priority Tag [0-7] 0
Egress Tag Handling None
Bridge Port
Ingress Tag Handling None
Bind Fast Ethernet [Number] /
PCS [Number]
1