120
DELAY CLOCK
When you set it to OFF, the absolute delay time is determined in milliseconds. If you select a note
value, then the delay time is set to the value of this note. The absolute length of this note value
depends on the value entered to CLOCK TEMPO in the global clock generator (refer to this section).
In this case, the absolute delay time in milliseconds is ignored.
If the delay time determined by the clock generator exceeds the maximum value of 693 ms, then
the delay time is automatically set to a value equivalent to half of the entered value.
DELAY FEEDBACK
Controls the amount of feedback of the Delay.
DELAY COLOR
A filter is placed in the delay effect's output, that also effects the feedback path. It can be faded
between a Lowpass (negative range) and a Hipass (positive range). The filter causes the delay
repeats to become duller and duller, just like on a tape echo, or for a nice unnatural effect, to
become thinner with increased harmonics (Hipass).
DELAY RATE
Determines the speed of the Delay LFO.
DELAY DEPTH
Controls the intensity of the delay modulation by the LFO. Like the Chorus LFO, the Delay LFO
modulates the left and right sides of the signal antiphase, which generates a true stereo effect.
Wenn das Delay für rhythmische Effekte verwendet wird, dann sollte die Modulationstiefe möglichst
gering eingestellt werden oder auf Null gestellt werden, da die LFO-Modulation das Timing des
Delays beeinflusst
DELAY SHAPE
Determines the waveshape of the Delay LFO. You can select from among 68 waveshapes (just like
for the main LFOs).
To Next Page
Loading...
