VIRUS CLASSIC MANUAL 131
Global And System Parameters
MIDI SOFT THRU
Soft Thru forwards all MIDI data the Virus receives from the MIDI input to the MIDI output socket.
The MIDI data the Virus generates itself are being mixed in.
KNOB MODE
Provides a selection of several knob operating modes which you can activate depending on per-
sonal preference or suitability to the tasks you currently dealing with:
WARN Patches and Multis can be stored. Furthermore the “SOUND EDITED! Re-
member storing” alert in the multimode is disabled. The mode is especially
made for live musicians who need to switch in between edited multi settings
without warnings.
Modus Symbol Description
OFF
The knobs are inactive.
JUMP
≤≤
≤≤
In Jump Mode, the parameter jumps directly and absolutely to
the value determined by the current position of the knob.
SNAP
®®
®®
When you adjust a knob In Snap Mode, the original setting
determines the value until the point where the movement of the
knob passes beyond this position. The parameter does not jump
to the value as in JUMP Mode.
RELATIVE
≤≤
≤≤
When you adjust a knob in RELATIVE Mode, the parameter is
affected immediately but not absolutely. The value change from
the original value to the new value reflects precisely the amount
you adjusted via a given control.
Value Description
To Next Page
Loading...
