48
Display of values
When a menu is active, different display options are available for parameters with a dedicated knob.
These can be selected under the menu item KNOB DISPLAY in the CONFIG menu:
Value Description
OFF
Knob movements are not displayed; the current contents of the display
remain intact when you turn a knob.
SHORT
When you turn a knob, the current contents of the lower display line are
briefly overwritten by data representing the change in parameter value;
once the action is completed, the original contents reappear in the lower
display line.
LONG
Same as SHORT, except that - you guessed it - the display shows the knob
data for a longer period of time.
ON
The contents of the display are overwritten when you turn a knob; the orig-
inal menu does not reappear in the display.
To Next Page
Loading...
