VIRUS CLASSIC MANUAL 351
Appendix
Appendix
System Exclusive Data
The Parameters of the VIRUS are organized in three so-called pages A, B and C. Each page
contains 128 parameters, addressed by numbers from 0 to 127. Each parameter is represented
by one byte with a maximum value of 127. All parameters are individually accessible by SysEx-
Parameterchange.
The pages A and B represent a Single-Program, thus a Single-Program contains 256 Bytes.
Page A (LowPage) contains Single parameters that are usefull for MIDI automation. The param-
eters of this page are additionally controllable by MIDI Control Change. The sending and recep-
tion of MIDI Control Change can be enabled or disabled by MIDI CONTROL LowPage (CONFIG
menu). When disabled (LowPage=SysEx), the VIRUS only sends and receives SysEx Parameter
Change on Page A. When enabled (LowPage=Contr), the VIRUS sends MIDI Control Change
on parameter movement, and receives both MIDI Control Change and SysEx-Parameterchange
on Page A. The default setting is LowPage=Contr.
The remaining Single parameters in Page B (HiPage) are additionally controllable by MIDI Poly-
phonic Pressure (!). The send and reception of MIDI Poly Pressure can be enabled or disabled
by MIDI CONTROL HiPage (CONFIG menu).
When disabled (HiPage=SysEx), the VIRUS only sends and receives SysEx Parameter Change
on Page B. When enabled (HiPage=PolyPrs), the VIRUS sends MIDI Poly Pressure on parame-
ter movements, and receives both MIDI Poly Pressure and SysEx Parameter Change on Page
B. This feature should not be used in connection with a keyboard that sends Polyphonic Pres-
sure. The default setting is HiPage=SysEx.
Page C contains Multi parameters and Global parameters. These parameters are sent and
received only by SysEx Parameter Change.
In the following, all bytes are shown in hexadecimal representation.
To Next Page
Loading...
