78
OSC2 SEMITONE parameter. If the RINGMODULATOR VOLUME is zero, the ring modulator is
switched off. OSC VOL does NOT affect the ring modulator level. Therefore the original oscillator
signal can be levelled independently of the ring modulator.
You’ll find another ring modulator in the effects section of the Virus. It, however, processes entirely
different input signals.
When the noise generator is used by Oscillator 2 for frequency modulation (see FM mode), the
NOISE COLOR setting also influences the sound of the frequency modulation.
Mixer
OSC BAL
Determines the balance between the Oscillators 1 and 2 volume level.
SUB OSC
Determines the volume level of the SubOscillator.
OSC VOL
This knob has two functions:
Wert Beschreibung
MIDDLE
Neutral (white noise, equal spectrum).
NEGATIVE
Low pass (pink noise, emphasis on bass frequencies).
POSITIVE
High Pass (pink noise, emphasis on trebble frequencies)
To Next Page
Loading...
