52
To prepare your custom banks in SoundDiver, open a library and the Device window. Shrink the win-
dows so that both can fit on the same screen, with the Library window on the left. Now you can
drag and drop any of the patches onto a specific patch location in banks A or B. When the dialog
opens, click on 'Store'. The patch will then be transmitted to the equivalent location in the Virus'
RAM. If you like, you can drag and drop multiple patches in one go, or if you wish to do an entire
library of 128 patches at once, choose 'Select All' from the Edit menu and make sure that you posi-
tion the first patch over location 000 in the relevent bank.
Once you have compiled banks A and B to your liking, use Store To Flash to write them to your least
favourite ROM banks :-)
All that's left to do, is to load your old sounds back into banks A and B, should you wish to do so.
Either play the sequence containing the Midi dump, or open the library you saved earlier, Select All,
and then drag and drop to the relevent bank in the Device window.
To Next Page
Loading...
