Access VIRUS CLASSIC - Page 71

VIRUS CLASSIC MANUAL 71
The Parameters
DESTINATION
OSC AMOUNT
Controls the modulation intensity of the LFO.
FADE IN
This parameter lets you automatically initiate a delayed fade-in the LFO3 modulation that you set up
via OSC AMOUNT (see the section above). FADE IN controls the overall delay and fade-in time.
SHAPE
Determines the waveshape of the LFO. You can select from sine, triangle, sawtooth, pulse, S&H
(abb. for: Sample & Hold) and S&G (abb. for: Sample & Glide) waves. Here you can also select the
62 cyclical shapes that are based on the oscillator waveshapes.
CLOCK
Same as LFO 1; see paragraph above.
Destination Remarks
OSC 1
The pitch of Oscillator 1
OSC 1+2
The pitch of both oscillators
OSC 2
The pitch of Oscillator 2
PW 1
The pulse width of Oscillator1
PW 1+2
The pulse width of both oscillators
PW 2
The pulse width of Oscillator2
SYNCPHASE
Determines the phase position of Oscillator 2 when it is synced up to
Oscillator 1 via the SYNC function.