86
FILTER-2 CUTOFF LINK
Switches the knob and the parameter CUTOFF 2 (see appropriate section) back and forth between
two operating modes:
CUTOFF LINK pertains exclusively to the CUTOFF 2 knob and the corresponding parameter. CUT-
OFF 2 has no influence on the other parameters of the second filter.
KEYFOLLOW BASE
This feature determines the base note for the filter KEYFOLLOW: When you press the key selected
here, the filter frequency you determined manually has priority - i.e. it is not influenced in any man-
ner - regardless of the KEY FOLLOW setting (see appropriate section) for the filters. As the interval
between the KEYFOLLOW BASE value and the keys increases as you move up towards the higher
end of the keyboard, the influence of KEY FOLLOW increases accordingly. KEYFOLLOW BASE
affects both filters simultaneously.
Value Description
ON
In this mode, CUTOFF 2 operates relatively to the CUTOFF knob value
rather than absolutely (OFFSET): The cutoff frequency of the second filter is
- like the first filter - determined by the CUTOFF value. However you can
dial in an offset (relative ascending or descending deviation) of the fre-
quency via the CUTOFF 2 knob. At the center position (12 o’clock) of CUT-
OFF 2, the frequencies of the two filters are identical.
OFF
Now,the CUTOFF and CUTOFF 2 knobs are no longer linked and CUTOFF
2 operates absolutely in a control range of 0 to 127. In this case the CUT-
OFF and CUTOFF 2 knobs are two independent control features that deter-
mine the respective cutoff frequencies for Filter-1 and 2.
To Next Page
Loading...
