41
Control Tests
4
Wipe the tip of the bottle with a
tissue. Cap the bottle tightly.
Remove and discard the used
test strip.
9
NOTE
• Most people just test the Level 1 control. If you wish, you can also test a Level 2 control. A set of
Level 1 and Level 2 control solutions is available for purchase.
• The ranges for Level 1 and Level 2 control solutions are printed on the test strip container label.
• The meter turns o 90 seconds after a successful test or 15 seconds after the test strip is removed,
provided no other action is taken.
54988_08100918001_EN.indb 41 9/30/16 5:04 PM
To Next Page
Loading...
