2-4 System Components User Manual
LT22
or
SB22
Figure 2.8
ES 2200 System Tag
(band not shown)
ES 2200 System Tags
The ES 2200 System Tag (Figure 2.8) is a small wristwatch-sized
device that is worn by a resident or attached to an asset.
Two models are available:
LT = Long Term resident care
SB = Slotted Back; to be used on infants and assets
When the Tag enters a monitored zone, the system detects the Tag and
responds by sending a signal via the Receiver to the Controller. This
information is processed by the Controller for appropriate control
action or response at the zone.
Tags are attached to residents/assets with a nylon-mesh-reinforced
vinyl band.
LT32
or
SB32
Figure 2.9
IS 3200 System Tag
(band not shown)
IS 3200 System Tags
In addition to the look and functionality of ES 2200 System Tags, IS
3200 System Tags (Figure 2.9) are assigned to a specific resident or
asset (via the Tag Test Station and a computer with the Accutech
Software). The computer then associates a name, room number, and
any other helpful comments about the resident or asset with that Tag.
When the Tag enters a monitored zone, the system detects the Tag and
responds by sending a signal via the Receiver to the Controller and the
Multiplexer. This information is processed by the Controller for
appropriate control action or response at the zone while the
Multiplexer sends the information to a computer with the Accutech
Software and/or to Graphic Display Panels (GDPs). This information
is processed by the Controller and the Multiplexer for appropriate
control action or response at the zone.
Tags are attached to residents/assets with a nylon-mesh-reinforced
vinyl band.
To Next Page
Loading...
