User Manual System Components 2-9
Figure 2.27
Automatic Door Deactivation
Automatic Door Deactivation
In automatic door applications (doors that open via a motion
sensor or push paddle) (Figure 2.27), the Accutech System can
deactivate this feature when a Tag enters a monitored zone’s Tx
Activation Field.
Figure 2.28
Band Alarm Lockdown
Band Alarm Lockdown
Band Alarm Lockdown (Figure 2.28) can engage specific facility
Magnetic Locks when a Band Alarm occurs.
Figure 2.29
Fire Panel Interface (FPI)
Fire Panel Interface (FPI)
The Fire Panel Interface (FPI) (Figure 2.29) ensures that in the
event of a fire alarm, the Magnetic Locks and Elevator
Deactivation Circuitry will disengage. Although the restraint
systems are disengaged, the system’s visual and audial alarms
will remain active.
Figure 2.30 Local Alarm
Local Alarm
The Local Alarm (Figure 2.30), a sounder, is intended to attract
attention near the monitored zone.
Figure 2.31
Multi-Tone Local Alarm
Multi-Tone Local Alarm (MTLA)
The Multi-Tone Local Alarm (MTLA) (Figure 2.31) can use 8
tone variations to attract attention near the monitored zone.
To Next Page
Loading...
