G-2 Glossary User Manual
Egress alarm
An alarm condition that occurs when a Tag is in the Tx Activation Field
and a door is opened (or PIR detection).
Elevator
Deactivation Circuitry
Circuitry that deactivates an elevator’s call button(s) when a Tag is a
monitored elevator zone.
ES 2200 System
A complete wanderer, asset, or infant security system.
ES 2200 System Tag
A small wristwatch-sized device worn by a resident, infant, or attached to
an asset.
Escort Function
A function of the Keypad used to escort Tags through a monitored zone
without triggering alarms.
Fire Panel Interface
(FPI)
A FPI ties Accutech Security System components into the facility’s fire
panel. Required if the system includes Magnetic Locks and/or Elevator
Deactivation Circuitry. In the event of a fire, Magnetic Locks and Elevator
Deactivation Circuitry are disabled. However, if there is still power to the
system, the alarms will still sound.
Floor-to-Floor Tag
discrimination
Set during installation, Floor-to-Floor Tag discrimination allows the
software to be configured so that predetermined ranges of Tags can be
designated to individual floors, thus when alarms occur they only appear on
PCs associated with that floor (This aids in reducing nuisance alarms from
bleed through especially in stacked zones). Regardless of what the PCs are
configured to see, zones will function as usual (i.e., locking doors and/or
sounding alarms if applicable).
Graphic Display Panel
(GDP)
A display panel, which provides staff with a representation of the floor
being monitored. GDPs are custom-made to a facility’s floor plan and
notify staff when an alarm condition occurs in a monitored zone through a
piezo buzzer and alarm-specific LEDs.
Intelli-Band Technology
A feature of BR42 Tags, which will alarm if the band is loosened, cut,
saturated, removed, or tampered with.
IS 3200 System
A complete wanderer, asset, or infant security system.
IS 3200 System Tag
A small wristwatch-sized device that is worn by a resident, an infant, or
attached to an asset. They are assigned to a specific resident or asset (via
the Tag Test Station and Accutech Software). Once assigned, the computer
associates a name, room number, and any other pertinent information about
the resident/infant/asset with that Tag.
To Next Page
Loading...
