Software66
English
BIOS Setup Utility
The BIOS Utility is a hardware configuration program built into your
computer’s BIOS (basic input/output system).
Your computer is already properly configured and optimized, and you
do not need to run this utility. However, if you encounter
configuration problem, you may need to run it.
To activate the BIOS Utility, press F2 during the POST(power-on-self-
test) while the Aspire logo is being displayed. .
Bt2811`F/cppl!!Qbhf!77!!Uvftebz-!Nbsdi!22-!3114!!22;5:!BN
To Next Page
Loading...
