Chapter 5 43
6. Remove the front I/O board.
Note:Circuit boards >10 cm2 has been highlighted with the yellow rectangle as above image
shows. Please detach the Circuit boards and follow local regulations for disposal.
Removing the Power Button Cable Module
1. See “Removing the Front I/O Board” on page 41.
2. Loosen the screws that secure the power button cable module to the mainboard tray.
Screw (Quantity) Color Torque Part No.
M1.6 x L6 (2) Chrome 86.1A56P.6R0
To Next Page
Loading...
