88 Chapter 7
Power Configuration
Parameter Description Option
Deep Power Off Mode Enables or disables Eut Lot 6 support. Enabled
Disabled
Power On by RTC Alarm Use this feature to set an event using the Real Time Clock (RTC) to
wake up the system at a specified time.
If this item is set to Enabled, the following items will display.
Date (of Month)
Use this feature to set the date settings for the Real Time Clock
(RTC). You can choose between 1 to 31. The default setting is Every
day.
Time (hh:mm:ss)
Use this feature to set the time settings for the RTC in [00:00:00]
format.
Enabled
Disabled
Restore on AC Power Loss Use this feature to set the power state after a power outage. Select
Power-Off for the system power to remain off after a power outage.
Select Power-On for the system power to turn on after a power outage.
Select Last State to allow the system to resume its last state before a
power outage.
Power-On
Power-Off
Last State
To Next Page
Loading...
