90 Chapter 7
Security
The BIOS provides an Administrator and a User password. If you use both passwords, the Administrator
password must be set first.
Parameter Description Option
Administrator Password This item indicates if an Administrator password has been entered for the system. "Not
Installed" means a Administrator password has not been set.
User Password This item indicates if a user password has been entered for the system. "Not Installed" means
that a user password has not been set.
Set Administrator Password Select this item and press <Enter> to access the submenu. Then enter a new password for the
Administrator and press <Enter> to install a new Administrator password.
Power/Reset Button Lockout Enabled
Disabled
BIOS Write Protect Select Enabled to prevent the user from writing data into the BIOS
Setup Utility. The options are Enabled and Disabled.
Enabled
Disabled
TPM Support TPM (Trusted Platform Module) Support improves data integrity and
network security. Enables or disables TPM support.
Enable
Disable
TPM State Enables or disables TPM support. Your system will reboot to change
the TPM State.
Enabled
Disabled
TPM Operation None
Current TPM Status
TPM Enabled Status This feature indicates if TPM support is enabled or disabled. Enabled
Disabled
TPM Active Status
TPM Owner Status This feature displays the TPM Owner status. Unknown
Chassis Opened Warning Enables or disable the chassis open warning function. Enabled
Disabled
To Next Page
Loading...
