Acer Altos R520 - RAID Utility Installation; SUSE Linux Enterprise Server 10 EM64 T Installation (with Integrated SAS Hardware RAID 2); Drivers Required; Software Required

115 Altos R520 Installation Configuration Guide
RAID Utility Installation
1. You can find the RAID Web Console 2 in EasyBUILD 7.1. Please refer to
the directory of the RAID Web Console 2 in Software Required section
above and copy the utility from the EasyBUILD 7.1 to HDD first.
# mount /media/dvdram
# cp –R /media/dvdram/app/R520/raid/Integrated_SAS/Linux/. /tmp
2. Install RAID Web Console 2 utility
# cd /tmp/
# unzip ir3_Linux_RWC2_v1.19-00.zip
# chmod 755 install.sh
# chmod 755 RunRPM.sh
# ./install.sh
3. Type y to accept the license agreen and select 1 for full installation.
4. To start RAID Web Console 2, click on start button, select System -> More
Programs -> RAID Web Console 2 Startup UI
SUSE Linux Enterprise Server 10 EM64T Installation (with
integrated SAS hardware RAID 2)
Below information describes how to manually install SUSE Linux Enterprise
Server 10 EM64T on Altos R520 with integrated SAS hardware RAID 2.
Drivers Required
For SUSE Linux Enterprise Server 10 EM64T Installation, the following device
drivers are required. The drivers can be found in the EasyBUILD 7.1 build 600
(or later)
Device Version EasyBUILD Version
Integrated SAS
hardware RAID 2
00.00.03.18 EasyBUILD 8.0 build 200 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
0.3.3.3 EasyBUILD 8.0 build 200 (or later)
Onboard VGA N/A OS built-in
IOAT 2.15 EasyBUILD 8.0 build 200 (or later)
Onboard USB 2.0 N/A OS built-in
Software Required
The management utility of integrated SAS hardware RAID 2 can be found in
the EasyBUILD 7.1 build 600 (or later).
Software Version EasyBUILD Version