Altos R520 Installation Configuration Guide 122
# mount /media/dvdram
# cp –R /media/dvdram/app/R520/raid/Integrated_SAS/Linux/. /tmp
2. Install RAID Web Console 2 utility
# cd /tmp/
# unzip ir3_Linux_RWC2_v1.19-00.zip
# chmod 755 install.sh
# chmod 755 RunRPM.sh
# ./install.sh
3. Type y to accept the license agreen and select 1 for full installation.
4. To start RAID Web Console 2, click on start button, select System -> More
Programs -> RAID Web Console 2 Startup UI
SUSE Linux Enterprise Server 10 EM64T Installation (with
onboard SATA RAID)
Below information describes how to manually install SUSE Linux Enterprise
Server 10 EM64T on Altos R520 with onboard SATA RAID.
Drivers Required
For SUSE Linux Enterprise Server 10 EM64T Installation, the following device
drivers are required.
Device Version EasyBUILD Version
Onboard SATA
RAID
06.28.1110.20
06
EasyBUILD 7.1 build 600 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
7.3.15-NAPI EasyBUILD 7.1 build 600 (or later)
Onboard VGA N/A OS built-in
IOAT 2.15 EasyBUILD 8.0 build 200 (or later)
Onboard USB 2.0 N/A OS built-in
Software Required
The management utility of onboard SATA RAID can be found in the EasyBUILD
7.1 build 600 (or later).
Software Version EasyBUILD Version
RAID Web Console
2
1.19-00 EasyBUILD 7.1 build 600 (or later)
Configuring onboard SATA RAID
Please refer to the Appendix C. for the onboard SATA RAID configuration.
To Next Page
Loading...
