Acer Altos R520 - RAID Utility Installation; Network Utility Installation; Windows 2000 Advanced Server SP4 Installation (with Integrated SAS Hardware RAID 2); Drivers Required

Altos R520 Installation Configuration Guide 64
RAID Utility Installation
1. Please insert the EasyBUILD into the optical drive.
2. Expand Utilities -> Altos R520 -> Integrated SAS Hareware RAID, select
RAID Web Console 2 (Windows) and click on Setup.
3. Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
1. Please insert the EasyBUILD into the optical drive.
2. Expand Utilities -> Altos R520 -> Intel Gigabit Ethernet Controller/Intel
PRO/1000 Network Adapter, select PROSet Utility (Windows 2000) and
click on Setup.
3. Follow the instruction and use the default setting to complete the
Network Utility Installation.
Windows 2000 Advanced Server SP4 Installation (with
integrated SAS hardware RAID 2)
Below information describes how to manually install Microsoft Windows 2000
Advanced Server SP4 on Altos R520 with integrated SAS hardware RAID 2.
Drivers Required
For Windows 2000 Installation, the following device drivers are required.
Device Version EasyBUILD Version
Integrated SAS
hardware RAID 2
2.20.0.32 EasyBUILD 8.0 build 200 (or later)
Onboard Chipset 8.3.0.1011 EasyBUILD 8.0 build 200 (or later)
Onboard Gigabit
Ethernet
9.12.18.0 EasyBUILD 8.0 build 200 (or later)
Onboard VGA 8.24.3-
060405a-
038923C-Intel
EasyBUILD 8.0 build 200 (or later)
Onboard USB 2.0 N/A OS built-in
IOAT 1.2.79.9 EasyBUILD 8.0 build 200 (or later)
Hot-swap
backplane
5.0.6262.1 EasyBUILD 8.0 build 200 (or later)
Software Required
The management utility of integrated SAS hardware RAID 2 can be found in
the EasyBUILD.
Software Version EasyBUILD Version
RAID Web Console
2
2.63 EasyBUILD 8.0 build 200 (or later)