Altos R520 Installation Configuration Guide 42
2. Expand Utilities -> Altos R520 -> Integrated SAS SW RAID, select RAID
Web Console 2 (Windows) and click on Setup.
3. Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
1. Please insert the EasyBUILD into the optical drive.
2. Expand Utilities -> Altos R520 -> Intel Gigabit Ethernet Controller/Intel
PRO/1000 Network Adapter, select PROSet Utility (Windows Server 2003
x64) and click on Setup.
3. Follow the instruction and use the default setting to complete the
Network Utility Installation.
Windows Server 2003 Enterprise x64 Edition Installation (with
onboard SATA RAID)
Below information describes how to manually install Windows Server 2003
Enterprise x64 Edition on Altos R520.
Drivers Required
For Windows Server 2003 x64 Installation, the following device drivers are
required.
Device Version EasyBUILD Version
onboard SATA RAID 04.24.0620.20
06
EasyBUILD 7.1 build 400 (or later)
Onboard Chipset 7.4.0.1005 EasyBUILD 7.1 build 400 (or later)
Onboard Gigabit
Ethernet
9.3.39 EasyBUILD 7.1 build 400 (or later)
Onboard VGA 8.24.3.0 EasyBUILD 7.1 build 400 (or later)
Onboard USB 2.0 N/A OS built-in
IOAT 1.2.52.0 EasyBUILD 7.1 build 400 (or later)
Software Required
The management utility of onboard SATA RAID and NIC can be found in the
EasyBUILD.
Software Version EasyBUILD Version
Microsoft Scalable
Networking Pack
N/A
http://www.microsoft.com/downloads/
details.aspx?FamilyID=778ee6fe-5359-
4c2f-b89d-
f35f2b1b83cd&DisplayLang=en
RAID Web Console
2
1.13-07 EasyBUILD 7.1 build 400 (or later)
Intel PROSet Utility 10.4.4.2 EasyBUILD 7.1 build 400 (or later)
To Next Page
Loading...
