Acer Altos R520 - Network Utility Installation; Windows Server 2003 Enterprise Edition SP1 Installation (with Onboard SATA RAID); Drivers Required; Software Required

57 Altos R520 Installation Configuration Guide
3. Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
1. Please insert the EasyBUILD into the optical drive.
2. Expand Utilities -> Altos R520 -> Intel Gigabit Ethernet Controller/Intel
PRO/1000 Network Adapter, select PROSet Utility (Windows Server 2003)
and click on Setup.
3. Follow the instruction and use the default setting to complete the
Network Utility Installation.
Windows Server 2003 Enterprise Edition SP1 Installation (with
onboard SATA RAID)
Below information describes how to manually install Windows Server 2003
Enterprise Edition on Altos R520.
Drivers Required
For Windows Server 2003 Installation, the following device drivers are required.
Device Version EasyBUILD Version
onboard SATA RAID 04.24.0620.20
06
EasyBUILD 7.1 build 400 (or later)
Onboard Chipset 7.4.0.1005 EasyBUILD 7.1 build 400 (or later)
Onboard Gigabit
Ethernet
9.3.39.0 EasyBUILD 7.1 build 400 (or later)
Onboard VGA 8.24.3.0 EasyBUILD 7.1 build 400 (or later)
Onboard USB 2.0 N/A OS built-in
IOAT 1.2.52.0 EasyBUILD 7.1 build 400 (or later)
Software Required
The management utility of onboard SATA RAID can be found in the EasyBUILD.
Software Version EasyBUILD Version
Microsoft Scalable
Networking Pack
N/A
http://www.microsoft.com/downloads/
details.aspx?FamilyID=c65f4a89-f4da-
463e-a496-
4b5abd660bf9&DisplayLang=en
RAID Web Console
2
1.13-07 EasyBUILD 7.1 build 400 (or later)
Intel PROSet Utility 10.4.4.2 EasyBUILD 7.1 build 400 (or later)
Configuring onboard SATA RAID
Please refer to the Appendix C. for the onboard SATA RAID configuration.