Drivers Required 159
Configuring integrated SAS hardware RAID 160
Installation Tips 160
Downloading the VMware Infrastructure Client 160
VMware Infrastructure Client Installation on Windows 161
APPENDIX A: INTEGRATED SAS HARDWARE RAID CREATION ..... 163
Configuring integrated SAS hardware RAID 163
Load BIOS default setting 163
Enter the integrated SAS hardware RAID Configuration Utility 163
Loading Factory Default Setting 163
Creating and Initialing a RAID Volume 163
Assigning a Hot Spare Disk 164
APPENDIX B: INTEGRATED SAS SW RAID CREATION.................... 165
Configuring the integrated SAS SW RAID 165
Load BIOS default setting 165
Enable integrated SAS SW RAID function 165
Enter the integrated SAS SW RAID Configuration Utility 165
Loading integrated SAS SW RAID default setting 165
Create RAID 1 volume 165
Initial RAID Volume 166
Save and Exit Embedded RAID II Configuration Utility 166
APPENDIX C: ONBOARD SATA RAID CREATION ............................ 167
Configuring the onboard SATA RAID 167
Load BIOS default setting 167
Enable onboard SATA RAID function 167
Enter the onboard SATA RAID Configuration Utility 167
Loading onboard SATA RAID default setting 167
Create RAID 1 volume 167
Initial RAID Volume 168
Save and Exit Embedded RAID II Configuration Utility 168
APPENDIX D: INTEGRATED SAS HARDWARE RAID 2 CREATION .. 169
Configuring integrated SAS hardware RAID 2 169
Load BIOS default setting 169
Enter the integrated SAS hardware RAID 2 Configuration Utility 169
Loading Factory Default Setting 169
Creating and Initialing a RAID Volume 169
Assigning a Hot Spare Disk 170
To Next Page
Loading...
