Machine Maintenance Procedures 3-15
ODD Module Installation 0
1. Install ODD bezel (E) on ODD module (Figure 3-10).
2. Install ODD bracket (D) on ODD module (Figure 3-10).
3. Secure two (2) screws (C) to secure the bracket (D) to the back of ODD (Figure 3-10).
4. Install ODD module into ODD bay. Refer to Figure 3-9.
5. Install Base Assembly.
ID Size Quantity Screw Type
C M2.0*3.0 2
To Next Page
Loading...
