Acer Aspire 4349 - Mainboard Removal

Machine Maintenance Procedures 3-19
Mainboard Removal 0
Prerequisite:
HDD (Hard Disk Drive) Module Removal
1. Find Mainboard (A) on the base assembly (Figure 3-14).
Figure 3-14. Mainboard Location
2. Disconnect Bluetooth cable from mainboard connector (B). Refer to Figure 3-15.
3. Disconnect WLAN antenna (D) connected to WLAN card (C) and remove antenna
from the cable guides on the thermal module. Refer to Figure 3-15.
Figure 3-15. Mainboard Connector Location
A
C
D
F
G
E
E
B
H