3-28 Machine Maintenance Procedures
RTC battery Removal 0
Prerequisite:
Mainboard Removal
1. Find RTC battery (D) on Mainboard. Refer to Figure 3-18.
2. Using plastic tweezers, puch the RTC battery through the gap in the mainboard
connector (A) to release the battery. Refer to Figure 3-24.
Figure 3-24. RTC battery
Follow local regulations for battery (Figure 3-24) disposal.
3. Remove the RTC battery from mainboard connector.
RTC battery Installation 0
1. Place the RTC battery (D) into the mainboard connector (A) and secure it in place.
Refer to Figure 3-24.
2. Install Mainboard.
To Next Page
Loading...
