3-18 Machine Maintenance Procedures
HDD Module Installation 0
1. Attach HDD connector (C) to HDD module. Refer to Figure 3-13.
2. Place HDD brackets (E) onto HDD module (Figure 3-13).
3. Install and secure four (4) screws (D) to HDD brackets (E) (Figure 3-13).
4. Place HDD module onto the base assembly and connect HDD module to mainboard
connector (B). Refer to Figure 3-12.
5. Install USB Module.
ID Size Quantity Screw Type
D M3.0*3.5 Ni 4
To Next Page
Loading...
