Acer Aspire 4349 - HDD (Hard Disk Drive) Module Removal

Machine Maintenance Procedures 3-17
HDD (Hard Disk Drive) Module Removal 0
Prerequisite:
USB Module Removal
1. Find HDD module on the base assembly as shown in Figure 3-12.
2. Gently remove HDD module from mainboard connector (A). Refer to Figure 3-12.
Figure 3-12. HDD Module
3. Remove four (4) screws (D) from HDD bracket (E) (Figure 3-13).
4. Remove HDD bracket (E) from HDD module.
5. Remove HDD connector (C) from HDD module.
Figure 3-13. HDD Module
A
D
D
D
D
E
E
C