3-32 Machine Maintenance Procedures
4. Disconnect the Bluetooth Cable (C) from the Bluetooth module (A). Refer to
Figure 3-29.
Figure 3-29. Bluetooth Module
Bluetooth Module Installation 0
1. Connect the Bluetooth Cable (C) to the Bluetooth Module (A). Refer to Figure 3-29.
2. Secure the Bluetooth Module (A) to the board guide (B) in the base assembly
(Figure 3-28).
3. Install and secure the Bluetooth Module (A) to the base assembly (Figure 3-27).
4. Install Mainboard.
To Next Page
Loading...
