Acer Aspire 4349 - DC-In Jack Removal

Machine Maintenance Procedures 3-37
DC-in Jack Removal 0
Prerequisite:
LCD (Liquid Crystal Display) Module Removal
1. Find DC-in Jack Module (A) on Top Assembly . Refer to Figure 3-35.
2. Remove DC-in cable from cable guides on the top assembly (Figure 3-35).
3. Remove one (1) screw (B) from top assembly (Figure 3-35).
4. Remove DC-in Jack Module (A) from top assembly.
Figure 3-35. DC-in Jack Module
5. Remove DC-in Jack (C) from DC-in bracket (D) (Figure 3-36).
Figure 3-36. DC-in Jack
A
B
C
D