Machine Maintenance Procedures 3-23
3. Remove DIMM from mainboard connector (B). Refer to Figure 3-20.
Figure 3-20. DIMM Modules
4. Repeat steps 2 and 3 for remaining modules.
DIMM Module Installation 0
1. Insert DIMM into mainboard connector (B). Refer to Figure 3-20.
2. Push down on DIMM until module clips (A) lock in position. Refer to Figure 3-19.
3. Repeat steps 2 and 3 for remaining modules.
4. Install Mainboard.
To Next Page
Loading...
