3-30 Machine Maintenance Procedures
5. Insert keyboard assembly flanges into upper cover slots at an angle. (Figure 3-36)
Figure 3-36. Inserting Keyboard Assembly
6. Install keyboard assembly flush against the upper cover. (Figure 3-32)
7. Press along edge of keyboard assembly until secure with upper cover.
8. Turn computer over to show bottom of lower cover.
9. Install and secure screws (C) in ODD slot to lower cover. (Figure 3-31)
10. Install and secure screws (B) to lower cover. (Figure 3-31)
11. Install ODD module
ID Size Quantity Screw Type
A M2.5x5.0 14
B M2.5x4.0 6
C M1.0x1.5 OD7 3
To Next Page
Loading...
