Acer Aspire Z1620 - Rear IO Module Installation

93
Rear IO Module Installation
1. Install TV tuner to rear IO bracket (K). (Figure 3-42)
2. Install and secure NUT (I) to TV tuner.
3. Install LPT (G) and COM (H) connector from rear IO bracket (K).
4. Install and secure screws (J) to LPT (G) & COM (H).
5. Install Rear IO module into slots (L) on main frame. (Figure 3-43)
6. Install and secure screws (E) to main frame.
7. Secure TV tuner cable (C) and LPT&COM cable (B) to guide (D) on EMI side.
8. Connect LPT&COM cable (B) to mainboard connector (D).
9. Install EMI top.
Figure 3-43. Install Rear IO module into slots on main frame
ID Size Quantity Screw Type
A 4#40x6.0 2
J 6#32x5.0 4
L