65
Rear Stand Removal
1. Rotation rear stand (A) until 90 degrees. (Figure 3-11)
Figure 3-11. Rotation the stand until 90
degrees
2. Remove screws (B) from rear stand and rear cover. (Figure 3-12)
Figure 3-12. Remove stand screws.
3. Remove rear stand.
Rear Stand Installation
1. Install rear stand (A) to rear cover. (Figure 3-12)
2. Install and secure screws (B) from stand to rear cover.
3. Push rear stand(A) until operating angle of 10 degrees. (Figure 3-11)
ID Size Quantity Screw Type
B M4.0x12.0 3
A
B
To Next Page
Loading...
