79
HDD Module Installation
1. Install HDD module into slots (O) on main frame. (Figure 3-29)
Figure 3-29. Pull HDD module on main frame.
2. Install and secure screws (N) to HDD module and main frame. (Figure 3-28)
3. Install and secure screws (J) to ODD connector (K) and main frame.
4. Connect the following cables:
HDD and ODD power cable (G) to mainboard connector (D).
HDD cable (E) to mainboard connector (B).
ODD cable (F) to mainboard connector (C).
Secure power cable (G), HDD cable (E) and ODD cable (F) to guide (H) on main frame.
Secure HDD cable (E) to guide (I) on AC-IN bracket.
5. Install EMI top.
ID Size Quantity Screw Type
N M3.0x5.0 2
O
To Next Page
Loading...
