Acer Aspire Z1620 - Power Supply Removal

81
Power Supply Removal
Prerequisite:
HDD Module Removal
1. Locate AC-IN (A) and Power Supply (B) on main frame. (Figure 3-30)
Figure 3-30. Remove AC-IN and Power Supply.
2. Remove screws (G) from AC-IN bracket (I)on main frame.
3. Remove AC-IN (A) from AC-IN bracket(I).
4. Remove AC-IN cable (C) from guide (D).
5. Remove screws (H) from power supply on main frame.
6. Disconnect Power supply cable (E) from mainboard connector (F).
7. Remove power supply from main frame.
H
G
A
C
E
F
B
H
D
I